How To Make a Beautiful Stained Glass Effect Using Glue

DISCLAIMER: This post uses Gorilla Glue products which were sent to me free of charge to use on craft projects. All views and opinions are my own and not influenced by this in any way. 

I absolutely love stained glass, especially when the sun shines through it reflecting the beautiful colours on to anything nearby. Stained glass items can cost a lot of money though, so I decided to have a go at making my own. Well ok, it’s not actual stained glass, but the effect is very similar.

The trickiest part if you are as indecisive as I am, is finding a design you like. You can Google “free stained glass patterns” and you will find gazillions! Or you can design your own. I found the heart pattern above on Google. I also made a hummingbird picture, but that was taken from a photo I took of a stunning bird bath I saw in a garden centre.

You don’t need much for this project. Obviously you need glass or similar. I had a spare small picture frame lying around, so I took the back off it and used the glass in that for the heart design. The hummingbird was made on a sheet of clear perspex. You could even use a sheet of acetate and then cut around your design to turn it into a suncatcher on your window. If you saw THIS PROJECT you could decorate the sides with a stained glass effect and place a small candle inside (make sure the design is on the outside).

As well as the glass or perspex, you will need 2 types of glue. Gorilla Glue have every kind of glue imaginable, so they are the perfect brand to use. You need wood glue, and clear glue. Luckily Gorilla Glue have both, and they are top quality. You can buy these in most craft shops, Amazon, DIY shops… they are everywhere so very easy to find.

You will also need something to colour the glues. It took me a lot of experimenting to find the best type of product to use for this, so I have saved you the hassle of that. The black lines use wood glue and have to be very thick to hold their shape, and so adding any liquid colour makes the mixture too runny. I tried mixing the wood glue (which is white) with black acrylic paint but I kept getting various shades of grey, not black. I found the perfect colour and consistency was achieved using black food colouring paste. It has to be the paste or gel type though. Liquid is too runny. Dr Oetker has an Extra Strong Black food colour gel, but I used Sugarflair Black Extra. I hardly needed any to get a very strong black colour.

The colours on the design use clear glue, and you don’t want the mixture to be too thick or the light won’t come through as much. After lots of experiments I found liquid colours to be best for the design. You could use liquid food colouring, readily available from most supermarkets. Or you could use alcohol inks, which is what I used.

Now I’ve explained the importance of the right types of colours, let me show you how I did it.

—

HOW TO MAKE A STAINED GLASS EFFECT PICTURE

You will need:

• Sheet of glass/clear perspex/acetate
• Gorilla Glue Wood Glue
• Gorilla Glue Clear Glue
• Black food colour paste or gel
• Liquid food colours or alcohol inks
• Cocktail sticks or thin paint brushes
• Yoghurt pots or similar to mix colours in
• Disposable piping bag

INSTRUCTIONS:

• Print out the design of your choice and place your sheet of glass on top of it.

• Pour some wood glue in to a pot and mix in some black food colour paste until you get a rich black colour. Pour the black glue mixture into a piping bag and cut the very tip off. Practice piping some lines of the glue on to some scrap paper. If the lines are too thin, just cut a tiny bit more off the tip of the bag to make the hole slightly bigger.
• When you can pipe lines of the required thickness, pipe the lines of the design on to your glass, simply piping over the printed outline which you can see below the glass.

• When you have finished the outline, leave to dry completely overnight.

• Now it is time to colour in the design. Pour a small amount of clear glue into a small pot and add a few drops of your chosen liquid colour. Mix well with a cocktail stick. Using either a small brush or the cocktail stick, fill in any sections of the design which require that colour. The mixture starts to set fairly quickly so do all the sections for that colour first. (I found it much easier to use just a cocktail stick by scopping up a blob of the mixture on to the end and gently spreading it to cover the section, making sure it went right up to the black lines).

• Repeat this with each colour you need for your design, until it is completely filled in.

• Leave until dry.
• When dry, if you are putting it in a picture frame, simply use some clear glue or superglue around the inside edges of the frame and place your glass on to the glue, pressing firmly but gently for around 30 seconds to bond. Leave until set before displaying it.

And there you have your stained glass masterpiece! Place it in a sunny spot in your room so that the light can shine through it and make the colours dazzle.

Just look at the reflection of the design as the sun shines through it:

If you do try this, I would love to see your finished design. Let me know what you make. Have fun!

 

 

 

Advertisement

An Easy Table Centrepiece For All Occasions Using Picture Frames

DISCLAIMER: I was sent the Gorilla Glue products free of charge to use on craft projects, but this does not affect my opinions of them. All views are my own.

I love finding or making versatile items that can be used for lots of different things. One item to suit so many occasions. I recently made one such item, and it was so quick and easy to do, needing just a few things to make it.

There’s probably a name for this type of centrepiece but my brain isn’t telling me it so I’ll just call it a picture frame display. I have seen other people make square ones and stick photographs on each side, with a light inside to illuminate them gently. They are very pretty, but I wanted something that I could re-use at Christmas, barbecues, family get-togethers, birthdays, etc. I also wanted a different shape to the square ones I have seen, so decided to make a triangle one. You could of course make it any shape you want, but bear in mind that the more picture frames you use, the bigger it will be so the more space it will need on your table.

I mentioned already that it is easy to make, and that is thanks to using top quality products to hold the frames together. The people I have seen making the square ones have used hot glue to stick theirs together, but it is much easier to use a super adhesive tape instead. Gorilla Glue have a fantastic tape called Gorilla Tape Crystal Clear. It is a virtually invisible, super strong, waterproof, airtight, flexible tape, making it perfect for this project (and many others).

Depending on what you will be putting inside your centrepiece, you might need to glue a base on to the bottom. For this, I used Gorilla Glue Super Glue Precise Gel. It has a very thin nozzle, and the glue is a thick gel, making it much easier to control exactly where you apply it with no run. It dries rapidly too making it perfect for quick projects, and has a very strong hold. I only needed a base on my display for the one at the start of this post. I didn’t fancy trying to clear a pile of sand up at the end!!!

As well as the tape and glue, you will need 3 picture frames all the same size, a pen, strong thick cardboard, and a pair of scissors or craft knife. That is all. You can use elaborate looking frames or plain, but the edges will need to be straight so they can meet up perfectly to hold them together. You can paint your frames too if you prefer, to match the occasion. THIS CRACKLE EFFECT would look effective for this.

To begin, take any paper, pictures, mounts, and the backing from the picture frames. Keep the glass in though, and bend the fasteners down to hold it firmly in place.

Make sure the fasteners are not visible through the glass from the front. If they are, just bend them a bit more until you can no longer see them.

When you have done this, lie them on the table face down and position them side by side in a row. They need to be perfectly lined up so that there are no gaps at the bottom.

Cut a strip of tape long enough to completely stick 2 frames together without any gaps. You might need to cut the tape into a thinner strip depending on the thickness of your frames. Repeat to stick the second and third frames together. As you can see in the picture above, the tape is practically invisible.

To make the triangle shape, cut a strip of tape and stick it on either the left or the right open sides, so that it is half on the frame and half off. Stand the frames up, fold the overhanging tape back, and bring the frames together to form the triangle shape. Press the frames together well so that the overhanging strip perfectly joins them. If you can see any tape above the tops of the frames, carefully cut that off.

The tape is so strong that this will now hold together for multiple uses. If you want a base on yours, stand the frames on a strong piece of thick card and draw around it as close to the frames as possible.

Cut the shape out just inside the lines you have drawn, so that it doesn’t stick out when you glue it on to the frames. You can use scissors but I found it easier to use a craft knife. If using a knife, obviously make sure you have something underneath the card so you don’t cut your table!!

Squeeze a line of the Super Glue Gel on to the bottom of each frame.

Carefully place the cardboard cutout on to the frames, making sure it is lined up exactly, then press the edges down firmly.

Your display is now ready to use! You can fill it with decorative sand, as I did in the first picture. I added a candle and some shells. This would be perfect for beach themed wedding table centrepieces or Summer parties. Or use it as a terrarium to display small succulents or cacti.

How about some dried oranges, cinnamon sticks, and gourds for an Autumnal table?

Or filled to the top with baubles and beads for Christmas, You could add fairy lights to make it really pretty.

You could layer different coloured strings of beads and add a candle for a Christmas dinner table.

Or place a little posy of flowers inside to stop little fingers messing with them. For the display below, I just covered a shot measuring cup with copper twine, and used it to hold some forget-me-nots from the garden. This would make a fitting centrepiece for a funeral wake. (You won’t need a base for little flower arrangements).

These are just a few ideas. As you can imagine, the possibilities are endless!

Happy crafting 🙂

 

 

 

Brush Embroidery – Not Just For Cakes! A Gorilla Glue Project.

DISCLAIMER: This is a sponsored post – Gorilla Glue provided the glue (and pen), but the idea is my own.

 

A few months ago I did a craft project for Gorilla Glue, where I turned plain objects into pretty ones with a crackle effect. (See HERE for that project). As I said in that post, I like decorating things to transform them into something more beautiful. Another thing I enjoy doing is cake making and decorating, although I only do them for friends and family. There is a gorgeously elegant technique which is used to decorate cakes and cookies, called brush embroidery. It involves piping a royal icing design on to the cake, and then using a small brush to gently pull the edge of the icing in to the design so it looks like delicate stitching on fabric. I wondered if it would be possible to achieve a similar result using glue. Obviously this is not intended for anything edible!!!

After a bit of experimenting I discovered that Gorilla Glue Wood Glue mixed with a bit of powder paint works best for this. I tried it with acrylic paint but it doesn’t have the correct consistency. It needs to be like whipped cream or thick yoghurt, and the only way I could achieve that was by mixing powder paint with the glue. You can use any colour powder paint you want, but I personally love the effect with white.

Brush embroidery is a wonderful way of transforming any plain surface into a thing of beauty. This is how to do it yourself.

For this project you will need:

• Gorilla Glue Wood Glue
• powder paint in the colour of your choice
• some stiff-bristled thin paintbrushes for the details, and a bigger one for the main painting
• acrylic paint in the colour of your choice (this will be the main colour of your object)
• your object to transform (I used a plain box with a drawer, and a Kraft notebook)
• a disposable piping bag
• a piece of kitchen roll
• 3 small pots – one for your acrlylic paint, one for the glue mixture, one for clean water
• a pair of scissors
• pearlescent craft mica powder (optional – it adds a slightly pearlescent finish to the design)

You can buy plain wooden boxes in lots of different shapes from Amazon, Hobbycraft, etc. If you want to decorate a notebook cover, it is best to buy Kraft notebooks. They have plain brown covers so perfect for jazzing up.

Paint your chosen object using the acrylic paint in the colour of your choice. If you are painting a notebook cover, do it with the cover open to prevent paint getting on to any pages.

Leave to dry completely for around 3-4 hours.

Mix together some glue with the powder paint. You don’t need much.

It needs to be the consistency of thick yoghurt, about 4 parts glue to 1 part paint. If it is too thick, just mix in a bit more glue until you get the correct consistency. If you would like a slightly pearlescent effect to your design, add a pinch of craft mica dust to the mixture too.

When you lift your brush (or whatever you use to mix it) it should leave a ribbony trail on the surface of the mixture. Spoon the mixture into the end of a disposable piping bag, then snip the tip off making a small hole at the bottom. Pipe a basic outline of your choice design on to the now dry painted object. The most common design used on cakes is of flowers, so I stuck with that for my box and notebook, but feel free to try different ones.

Dip a thin stiff brush into the clean water and dab the excess off on the piece of kitchen roll. It needs to be damp but not too wet. Place the brush on to the inside edge of the piping and stroke it towards the middle of the shape, so it thins and fades.

You must make sure you keep the outside edge complete though or the effect will be lost. Dampen your brush every few strokes, as if it is too dry it will just stick and pull too much of the line away. When you have finished the shape you piped, pipe another and repeat the process. Build up layers of petals by piping another set inside the set you have just completed. You can add leaves around them, and pipe centre lines after you have done the brush embroidery.

You can fill in spaces in between the flowers by piping small dots, 5 or 6 around a central one to represent flowers. You can place your damp brush on to the edge of the dot nearest the centre one and drag it towards the middle, making little petal shapes. You can see these on the box I decorated. I left some as dots and dragged some to make petals. If you are leaving some as just dots, the mixture will probable form little peaks as you pipe it. Just use the damp brush to gently press the peaks down.

Leave to dry.

 

As you can see it is a very effective way to make pretty designs on plain items. No matter how many times you do it, you will never get the exact result again, meaning every item will be perfectly unique.

These are perfect to give as gifts for Mother’s Day, or any other special occasion. You can literally do this on any plain object. How about trying it on a photo frame? I will be doing it on an indoor plant pot for a gift for a friend soon. The possibilities are endless!

 

 

 

 

 

 

Make Your Own Spooktacular Ghost From Cheese Cloth – Great for a Halloween Decoration

Halloween is my 11 year old son’s favourite time of year. He doesn’t go trick-or-treating but he does love to decorate inside our house with as many spooky things as he can and have a family party. He also loves the build up to the day, having fun with lots of different craft activities, carving pumpkins, and baking yummy spooky treats.

Last year we decided to have a go at making a free-standing ghost, and as we wanted it to be see-through we used cheese cloth. It worked better than we imagined, so this year we have made a smaller version to stand on the table. It is such an easy activity that I thought it would be good to share it with you. Children would love to get involved as you do get in a sticky mess with this one!

It doesn’t cost much to make one yet they look so effective!

You need:

• large piece of cheese cloth
• 3 bottles, one taller than the other 2
• 3 balloons if making a large ghost, or 3 water balloons if making a small one
• some tape to secure the balloons
• PVA glue (I used Gorilla Glue Wood Glue)
• black scrap material or paper

If your bottles are empty, fill them with water. They need to have some weight to them so they don’t just topple over. Blow up your balloons and use tape to secure them to the bottles.

Position the bottles so that the taller one is at the back and the smaller ones are placed in front at either side. These will form the head and arm shapes.

Mix some PVA glue with a small amount of water in a tub (a takeaway tray or margarine tub is perfect). You really don’t need much glue at all, and you should mix 3 parts glue to 1 part water. You want the glue to be just slightly watered down.

Place the cheese cloth in to the glue mixture and toss it around until it is completely covered in glue.

Pick up the cloth and squeeze as much of the glue off as you can. Now for the trickiest part…. carefully open out the cloth. This can be a bit tricky as it just wants to stick to itself! When you have opened it out, gently drape it over your bottles so that it entirely covers them.

This was for the small ghost:

 

This was for the large ghost:

Move the cloth or bottles around until you have got the exact shape you want your ghost to be. Cut out a mouth and 2 eyes from your black material or paper and press them into position on the head part.

Leave to dry completely. I made the large ghost using ordinary school-type PVA and the small ghost above using Gorilla Glue PVA (wood glue). The Gorilla Glue dried much quicker. The ends take the longest, so make sure you spread them out a bit to help them. They do like to bunch up, and then that part will take a lot longer to dry.

When the cloth is completely dry and crispy feeling, it is time to take it off the balloons. You can either pop the balloons and peel them away, or very carefully pinch the cloth away from the balloons bit by bit. That is the way I do it.

I always think it looks more effective if you gently push the bottom of it inwards a bit to give it a better shape. And there you have your very own ghost.

Happy Halloween everyone!

 

 

Making a Crackle Paint Effect Using Gorilla Glue – Transforming Plain Objects into Beautiful Ones

One of the things I love to do in my spare time is to turn ordinary objects into something wonderful. For example, plain tiles transformed into beautiful coasters in THIS POST.

The lovely team at GORILLA GLUE recently invited me to come up with a craft project using some of their product range. There is a glue or tape for every possible need in their range, all very high quality, so I was really excited to be part of this. I immediately knew what I wanted to make. I initially had one in mind, but it turned into 3 as I enjoyed making it so much.

I have often admired objects that have been painted with Crackle Paint, which cracks as it dries, creating a really pretty distressed effect. This special paint can be fairly expensive though. Luckily it is easy to achieve the same effect using just Gorilla Glue Wood Glue and some cheap acrylic paint. You only need a small amount of glue so it is a much more cost-effective way of obtaining the result. One bottle of glue will transform loads of objects!

For my project I decided to transform some plain wooden boxes into a beach-finds box and a buttons box. I wanted the beach box to look a bit like driftwood, fitting in with the theme of it. One of my happy memories from childhood was going through the buttons that my mum kept in an old biscuit tin. It used to fascinate me how many different shapes and designs there were, so I now have a tin of buttons too. I wanted a nicer way to store them though so decided to make a button box, using some of the buttons to decorate it. After I had made the 2 boxes I wanted to see if the same effect could be achieved on glass, so decided to try it on a clean empty jam jar. It worked! So that became a toothbrush holder for the bathroom. The beauty of this project is you can make boxes or storage jars for anything at all! Boxes for baby keepsakes, ribbons, beads, bits and bobs, small stationery items… endless possibilities. Likewise with the jar version. A holder for toothbrushes, pens and pencils, craft tools, straws, kitchen utensils… again endless uses.

For this project you will need Gorilla Glue Wood Glue and Gorilla Glue Super Glue (if you want to stick decorations on). They have thought of everything with their super glue. Super glue often comes in a little tube or bottle and you have to carefully squeeze a little bit out, trying not to get too much but often ending up with a blob of it oozing out from underneath whatever you have stuck down. To make sure you get the exact amount of glue you want in the exact place you want it, with no big blobs, Gorilla Glue have brought out a bottle with both a brush and a nozzle to apply it. You can choose whichever works best for you. I loved the brush, as it was so easy to control the amount I used and place it only where I needed it.

As well as the glue, you will need plain wooden boxes or clean glass jars, acrylic paint in 2 different colours, and paintbrushes. If you want to stick any decorations such as buttons on, obviously you will need those too.

You can buy plain wooden boxes in craft stores such as Hobbycraft, or from Amazon. You don’t need to use expensive acrylic paint. I’m pretty sure mine came from a shop such as The Works at a really cheap price.

To begin, you will need to completely paint your box with one colour of the paint. Bear in mind that this layer will be the colour that you see in the cracks, not the main colour. I chose a yellowy-brown colour for the beach one and a dark green for the buttons.

Paint your box in the first colour and leave to dry completely. I left mine overnight to make sure it was thoroughly dry, but you can leave it for around 4 hours. If you want the inside to be the same colour as the cracks you can paint this too. Make sure you use something to prop the lid open while it dries though so the paint doesn’t get ruined.

This is where the fun starts. When the box is dry, paint a layer of wood glue on to one small section. The glue still needs to be wet for the next stage, which is why you MUST do this one section at a time.

Don’t worry about the glue going over the hinges. It dries clear so won’t be noticed when it is all complete. If you want thick cracks, paint the glue on in a thick layer. If you want fine cracks, paint a thin layer of glue on. If you want a mixture, paint it thinly with the glue but with a couple of thicker patches.

While the glue is still wet, use a different paintbrush to paint your main acrylic colour on top. (I used white for the beach box and lilac for the buttons). Make sure you do this gently but quickly in one layer, before the glue dries. If you apply too much pressure or paint the same area over and over you will end up mixing the paint into the glue, and it won’t crack at all. It doesn’t matter if it looks a bit uneven or patchy, as the cracks will hide that.

You will notice the paint start to crack almost immediately. As the glue dries it slightly contracts, pulling the paint layer apart and causing the cracks. You can let it dry naturally, but that will be time-consuming so it is best to help it along with a hair dryer on the coolest setting. This will speed up the process and let you move on to the next section within a minute or two. It is lovely to watch the cracks appear before your eyes!

Repeat this process on another section. Glue, paint while wet, then dry. Keep doing this until the whole box is complete.

I then painted the inside of my beach box in white to match the main colour on the outside.

When dry, you can fill it with whatever you choose.

If you want to add decorations, I would recommend using the superglue with the brush.

Simply brush a small amount of glue on to your decoration, and position it where you want it! Press it for a few seconds to make sure it has bonded, although it dries very quickly.

I glued buttons on to my button box, sticking some on top of others, until I got the design I wanted.

You can use the same method to paint your glass jar, although I managed to do each stage in one go rather with the glass. It was a lot quicker to do! Paint the whole jar in one colour and let it dry completely. I chose white for my bottom layer.

I couldn’t photograph the next stage as it had to be done super quick, but I then painted the jar in a layer of wood glue and quickly added a layer of dark blue on top. I used the hair dryer to dry it and finished the look with a matching blue ribbon tied into a bow around the top.

(Quick tip: if you have some sticky residue left on your jar from the old label, this is easily removed with just normal glass cleaner. Simply spray it on your jar then use the back of a dinner knife to softly scrape it off. It comes off so easily)!

Don’t they all look so pretty and effective? If you decide to have a go at this easy craft, I’d love to hear what you make! Have fun transforming the plain into the beautiful.

 

DISCLAIMER: I was sent the Gorilla Glue at no cost to be used in a craft project of my choice. All views and opinions are my own honest thoughts.